Geophysical service

The company performs geophysical works with high quality digital equipment AUSLOG DLS W450.

Depth of researches - to 450м (at the customer request, the depth of researches can be increased to 1000м by logging cable extension);

 The available directional equipment A698 allows measuring well deviation without conductor pipes with slope angle from 0 to 180 degrees.

Well-logging equipment consists of:

1. The interface of connection between the surface and the device mounted on the vehicle and W450 the Winch possesses such properties as: lightness, compactness, system of the depth exact measurement, automatic reeling, variable speed control, electronic measurement of a cable length, hand windlass or electric drives 12V, 115V or 220V.
2. Set of the logging equipment allows carrying out the geo-physical well logging complex including the following methods:

       - Gamma ray logging.

       - Directional surveys.

Logging equipment application:

• Depth of researches - to 450м (at the customer request, the depth of researches can be increased to 1000м by logging cable extension);
• The available directional equipment A698 allows measuring well deviation without conductor pipes with slope angle from 0 to 180 degrees.
• Magnetic susceptibility, Gamma or caliper devices are multiplex turning on at the request. Ref. A681, A631, A675, A608.
• In the wells, where there are magnetic materials (conductor pipes or magnetic rocks), measurements are taken by a gyroscopic inclinometer at an angle of 30 to 90 °to the horizon.

The method of natural gamma radiation is applied to lithological identification and radioactivity rocks characterization, and also the gamma measurement of drill-hole cores on a surface by means of the A631 & A675 gamma devices.

Our advantages:

• All geophysical equipment is regularly checked according to operating standards.
• Logging works are performed both in the territory of the Kyrgyz Republic, and in neighboring countries.
• Logging stations are regularly updated by the hi-tech equipment of domestic and import production.
• The equipment is adapted and checked in practice using in combination with import drilling equipment.
• The equipment used during works is domestic and digital, results of works  are digital files of a las-format, later processing is carried out with use of the programs Solver, WinLog, etc.
• The thermoplotter is used for prompt data printout.